The Mn2 Curved Arched Buttress System

The MN2 arch buttressed retractable pergola systems provide an elegant solution for any project. Each of
the custom designs are installed according to site specifications and can easily be adapted as required. This
model provides an outdoor covering system with an architectural edge to allow outdoor areas to be used
in all weather conditions. The system offers a wind rating up to Miami/Dade code with a Wind Sensor, and are
designed to stand up to even the worst of conditions rain, hail or shine.

All units are site specific models that are manufactured to size using high grade 6063 extruded aluminum profiles
finished with thermosetting powder coating which provides superior overall performance for exterior
product applications. All bolts, screws and pins are high grade stainless steel to ensure extended system life.
The MN2 rafter profiles (LT: 80mm x 125mm / XL: 110mm x 160mm) have been designed with unique water
guard side channels and cast aluminum end plates to allow for projections up to 4,5m per system. Widths
are customized according to site requirements and available in any size up to 4,5m. The MN2 system offers
up to 215 sq feet of protection at the touch of a button but when required linking multiple systems is also
possible and made easy by our patented storm channel joining system that ensures 100% waterproof join
every time. The MN2 system also includes an integrated gutter system with internal drainage to carry away
even the heaviest rain.

Remote controlled motorisation is provided by utilising European technology through a custom built direct
drive motor system to ensure smooth and quick operation at 26RPM. The optional hi powered LED-TEC
lighting system provides a practical touch of class and when coupled with a remote dimming controller
allows the user to change the mood to suit the surrounding environment.

The heart of the system is driven by the Suntech F3 eight wheel slider carriages (each F3 slider carriage has
a load limit of 600kgs) that incorporates a triple layer barrier system and works in conjunction with a timing
belt that has been reinforced with multiple internal stainless steel cables to provide a pulling strength of over
966kg. It’s this tension that is applied to the fabric membrane to allow an angle of 6 degrees fall possible and
ensure all water drains away in the internal gutter system.

The fire rated and 100% waterproof architectural membrane is available in a range of colors in both opaque
and transparent that provides maximum stability and resistance to temperature, moisture and dirt. It does
not shrink or bag, and the acrylic top coating makes it very easy to clean for years to come. When not in use
the fabric is neatly retracted under the systems hood to provide protection from the elements when not

To ensure the highest level of protection Suntech systems focus on all the details, this is why all Suntech
systems come standard finished with Stormguard soft touch edge seal on all parameters. Stormguard
provides the ultimate protection against rain intrusion around the outside of the system and is
only available on our systems. Stormguards soft touch edge seal is produced from an extra soft & flexible
Natural rubber to ensure the best possible protection from the elements.